Zeitschrift für Materialwissenschaften und Ingenieurwesen

Prediction of Hardness, Yield Strength and Tensile Strength for Single Roll Melt Spinning of 5083 Al-alloy Ribbons

Abstract

Jassim AK and Hammood AS

In this paper, an empirical model is applied to predict the hardness, yield strength, and tensile strength of rapid solidified ribbons. The discovered empirical equation is obtained depends upon the experimental results of rapid solidification process for 5083 Al-alloys. The empirical equations predict values and describe the behavior of ribbon with consideration of ribbon thickness, grain size, hardness, yield strength, and tensile strength. The experimental work involves difference operation conditions and the results indicate that orifice diameter, nozzle roll wheel gap, and melting temperature have direct impact on the quality of alloy. Additionally, the results showed that there is a good agreement between experimental and predicted values where the correlation coefficient is 0.99. The experimental show that there is a possibility to produce very thin ribbons with thickness in micrometer by reducing the distance between nozzle and roll wheel, and reduce the orifice diameter of casting. The hardness, and yield strength increased due to increasing the number of small grain size in the ribbons structure and rapidly heat transfer of the small ribbons thickness. Moreover, the optimal melting temperature of this alloy is 925ºC which produces high ribbon hardness compared with other melting temperature that used in this research.